OKC & Tulsa Fire Extinguisher Maintenance Services

Fire extinguishers save lives. These fire suppression tools are often your first  line of defense in controlling and eliminating a small fire. But like most things in life, they can only be used helpfully if they themselves are working properly. Thus, regular fire extinguisher inspections and maintenance are vital and are required by various state and federal regulations in order to remain code compliant.

Sometimes though in the business world, fire extinguisher inspections and maintenance could turn into a headache. That’s why Mac Systems offers on-site fire extinguisher maintenance services in both the Tulsa and Oklahoma City areas to save customers both time and money while helping them to stay code compliant and safe.

With an extensive fleet of fully-equipped service vehicles, we can perform almost all fire extinguisher services on-site - from recharging and typical maintenance to the required 6-year inspection and internal examination. Hydrostatic testing, or pressure testing using a liquid to verify its strength, check for leaks and ensure that the cylinder is safe to use, is the only needed fire extinguisher service that has to be performed off-site.

Different kinds of fire extinguishers will require different maintenance and testing, often at different times. Check the manufacturer’s instructions or your local Tulsa or OKC fire suppression company for the particular maintenance needed on a certain extinguisher. NFPA 10 requires that a thorough maintenance service be completed on all fire extinguishers at least once a year, at the time of hydrostatic testing, or when an inspection indicates a need for maintenance. Stored-pressure fire extinguishers requiring a 12-year hydrostatic test are also required to have an internal examination every 6 years where the fire extinguisher is emptied and inspected for problems. If they pass this inspection, the extinguisher can be recharged and reassembled for use again. Some kinds of extinguishers require hydrostatic testing every 5 years.

While regular monthly “quick check” fire extinguisher inspections can be done by the owner or a designated agent, the periodic in-depth maintenance and testing of fire extinguishers needs to be performed by a licensed and certified fire protection equipment company. Mac Systems has a staff of NICET certified and factory-trained professional technicians that perform your required fire extinguisher maintenance services right on-site.

It’s also important to note that in addition to regularly required fire extinguisher maintenance, recharging or servicing may be needed at any time, if: 1) the fire extinguisher has been used or there’s evidence of discharge; 2) the pin has been pulled; 3) the pressure gauge is not in the proper pressure area (usually green); or 4) there is any discerned damage to the extinguisher itself. If you note any of these things, maintenance service will be needed immediately to ensure safety and proper function of the extinguisher.

Mac Systems can handle all of your fire extinguisher maintenance, testing, and inspections, most of which can be performed conviently on-site, and also provides 24-hour emergency service. We can provide inspections annually, semi-annually, quarterly, weekly, and even daily to make sure your business is safe and always code compliant. Our on-site fire extinguisher maintenance services give you greater flexibility, cost-effectiveness, greater productivity, and relieve much of the headaches associated with these required maintenances and inspections. Let us make your job easier by taking care of all your fire protection system needs. From Tulsa and OKC fire protection system design, installation, maintenance, and inspection, we will keep your business safe and provide you with much greater peace of mind.